Re: Sleeve Puller

Posted by El Toro on July 10, 2006 at 10:08:09 from (64.12.116.65):

In Reply to: Sleeve Puller posted by IndianaRed on July 09, 2006 at 18:26:46:

Here's a web site for a sleeve puller made by Keith in Oregon. The puck would need to be machined to fit just inside your sleeves and with enough metal on the outside of the sleeve to clear the bore of the block. If your sleeve bore is 3.375" the puck should be machined to 3.355" to fit inside the sleeve. Hal
PS: Overall diameter of the puck should be around 3.555." http://www.ytmag.com/cgi-bin/viewit.cgi?bd=farmall&th=528476

Replies:

• Re: Sleeve Puller IndianaRed 19:27:06 07/10/06 (0)
• Re: Sleeve Puller chip man 12:31:26 07/10/06 (1)
  • Re: Sleeve Puller El Toro 13:15:11 07/10/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]