Re: Farmall 200 Sticky Governor

Posted by Roger46 on July 23, 2006 at 18:42:18 from (69.58.132.140):

In Reply to: Farmall 200 Sticky Governor posted by Dave Knapp on July 23, 2006 at 11:56:07:

I would first see if the engine will idle down by manually pulling the linkage from the govenor back to idle while the tractor is running. If it will not move back there may be some binding somewhere in the linkage, the carb, or in the govenor. There isn't much to the linkage as the shaft comes right out of the govenor. If it will not idle back by forcing it back by hand I would disconnect the linkage from the carb and see if it is coming from the govenor or the carb. If it is the carb, then something in the throttle plate is binding. If in the govenor you will probably need to remove it and find out the problem. Also, if it does go back to idle when you pull on the linkage manually then it is a problem in the govenor. Roger

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]