Farmall & IHC Tractors Discussion Board |
International 584 advise needed
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Rick Bright on August 13, 2006 at 12:49:22 from (166.102.26.37):
I am looking at a 584 International with a cab and a almost new Allied 495 loader with bucket and bale forks. I need something to handle round bales for my horses and bush hog my 50 acres with. I have a couple of questions I hope someone can help me with. The tractor seems in good condition. I ran it for about an hour this morning, picked up a round bale, moved it around, all gears work and sound good, picked the round bale up pretty high, parked the tractor on a dusty area, shut the tractor off and watched for a while. No leaks, the loader did not bleed off. No smoke, no blowby, hour meter not working with a little over 3000 hours showing. A few things concern me, one the parking brake does not work, I have read in past posts this can be bad news. Two, when I shut the tractor off with the PTO engaged I can hand turn the PTO shaft counterclockwise about 1/2 turn. Also I tried down pressure on the loader, I thought it would pick up the front of the tractor, the loader easily picked up the round bale of hay but did not have enough down pressure to pick the front of the tractor up. It would take some weight off but not pick it up. Is this normal??? Would these issues be a deal killer?? The tractor also has the British charging system. Lucas I believe. The guy who owns it got it with a farm he bought, I know him to be an honest guy he said he had it checked out by a ex International mechanic. He is asking $11,000... I know the Allied loader cost about $5,000 and this one is almmost new. I think I can get him down a couple of thousand. Sorry for the long post, I am hoping someone with experience with these tractors can give me some sdvice. I really liked the way this tractor ran. Thanks in advance
Replies:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|