Re: 424 lift problem

Posted by Haas on August 20, 2006 at 18:57:25 from (12.65.42.125):

In Reply to: 424 lift problem posted by Gary321 on August 19, 2006 at 20:15:56:

If the unit is jumping, I think it is due to a leak in either the control valve or the cylinder. I used to have a 424 and it did that for a while and then eventually would not lift at all. It was the seal on the piston in the lift cylinder. Had to have a new piston and O ring to fix it. The original seal was leather, so had to have new piston to accomodate the more modern O ring. There is a shut off valve on the 424 that shuts off the hydraulics to the 3 point lift so you can connect a remote to the system. Raise the lift up and close that valve and shut off the tractor. If the lift goes down, the piston seal is leaking.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]