Re: Hour meter hookup? Tire PSI?

Posted by Wardner on August 28, 2006 at 12:12:50 from (4.154.242.29):

In Reply to: Re: Hour meter hookup? Tire PSI? posted by JayWalt on August 28, 2006 at 05:57:43:

Gear lash is a "touchy feely" type of thing. Rotate the aluminum housing until it binds and then back off abit. It won't matter which way you rotate it. It has been years since I have messed around with speedo drives so I can't be more specific.

If you don't want to get involved, remove the tach cable from the distributer and see if there is a speedy rotation inside the aluminum housing when the motor is running. If so, you are OK there. If not, pull out the aluminum housing and you will find the little gear (spiral, I think) is stripped.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]