Re: 400 - 3 different leaks

Posted by Janicholson on September 10, 2006 at 08:50:29 from (66.173.50.74):

In Reply to: 400 - 3 different leaks posted by SDE on September 09, 2006 at 19:42:49:

I agree with Jossette,
The most likely place is the spool valve. Its job is to prevent flow in that direction when in neutral.
Be sure the lever and link on the valve are returning it to center, and be sure the little selector switch is firmly in the correct position for the type of cylinder being used. It is a flat sided knob with a roll pin sticking out that clips under a sheet metal strip.
exchanging two valves in the stack may let you know which one is leaking (though it does require removing stuff that is in the road. One tactic that works is to set the bucket down on some concrete blocks when not being used for a few days. This is safer (for guests and children), and prevents continuous pressure on the hoses and seals. The blocks keep the bucket out of the dirt, and allow the unit to be moved if it fails to start. Just a few Ideas, JimN

Replies:

• Re: 400 - 3 different leaks SDE 15:06:16 09/10/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]