Re: Sand Blasting

Posted by CNKS on September 12, 2006 at 09:43:55 from (204.249.178.135):

In Reply to: Sand Blasting posted by SuperA-Tx on September 12, 2006 at 09:19:38:

Don't sandblast anything without removing all the parts. You will never get all the sand out of them. I don't sandblast the chassis or engine, I use an angle grinder or an electric drill. It takes a LONG time, but it is safe. You should only sandblast "empty" parts. Sand will get into everything. Some people cover the holes as you mentioned. Not saying it won't work, but I don't trust that method.

Replies:

• Re: Sand Blasting Sanded and blasted 10:07:31 09/12/06 (7)
  • Re: Sand Blasting Andy Martin 10:43:32 09/12/06 (6)
    • Re: Sand Blasting CNKS 17:15:44 09/12/06 (0)
    • Re: Sand Blasting sanded n blasted 11:02:31 09/12/06 (4)
      • Re: Sand Blasting SuperA-Tx 12:16:42 09/12/06 (2)
        • Re: Sand Blasting Wardner 14:46:57 09/12/06 (0)
        • Re: Sand Blasting Andy Martin 12:41:46 09/12/06 (0)
      • Re: Sand Blasting Andy Martin 11:49:30 09/12/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]