Re: H Tranny won't shift to 5th

Posted by Bob M on September 29, 2006 at 08:30:57 from (151.190.254.108):

In Reply to: H Tranny won't shift to 5th posted by ryanfisher on September 29, 2006 at 07:55:20:

Does the shift lever move into the 5th gear position OK or does it "hang" close to the neutral gate? If the lever won't move into 5th you need to remove the "5th speed lockout screw" (located on the tranny deck forward and slightly to the left of the shifter tower) and replace it with a standard 3/8-16 x 3/4" cap screw.

Otherwise the problem could be a worn or bent 4-5 shifter fork **or** the 4-5 sliding gear and/or the mating input shaft gear are badly worn. You'll need to remove the tranny cover to determine.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]