Re: pto way too fast

Posted by Wardner on October 07, 2006 at 18:22:51 from (4.154.245.231):

In Reply to: pto way too fast posted by farmall 350 on October 07, 2006 at 12:38:14:

Someone may have installed the gear set for the later clutch type PTO. Or you may have the later PTO unit sticking out the back of your rear frame.

You can check the tooth count of the driving PTO gear by removing the cover on the center section. I can't tell you the tooth count because I don't have a 350 parts book.

I think the former is unlikely because I believe it would slow down the PTO. I am inclined to believe that you have the wrong PTO unit. This would be the clutch type that first became available on the later 460's. The PTO lever has an overcenter clutch feel to it. The early one has a consistant pull feel and a latch to hold it in gear. The later type also has a concentric circle about 6" in diameter. It is used ro align a large right angle drive that is usually fitted with a belt pully.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]