Re: 574 Clutch

Posted by Janicholson on October 15, 2006 at 19:24:56 from (66.173.50.13):

In Reply to: 574 Clutch posted by BEWILDERED on October 15, 2006 at 18:30:07:

Someone may have replaced the disk and not the PP. If the finger tip screws will adjust outward to compensate for the adjustment, I would try that first. Turn them all an equal amount, count turns. If they are abused as stated, you may be able to replace them alone to cure the problem. The throwout fork may be twisted on the shaft. (I'm not sure if this tractor has that style) If it does, the pin in the connection may be partiallyt sheared. Good luck repairing without splitting. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]