Re: Delco Remy 3-brush generator

Posted by Bob M on October 25, 2006 at 09:09:02 from (151.190.254.108):

In Reply to: Re: Delco Remy 3-brush generator posted by John T (Question for the on October 25, 2006 at 08:53:27:

Interesting question John T!

I suspect your idea would work. Presuming the regulator does it's job monitoring/limiting generator output (armature) current by modulating current flowing in field windings, there should be no risk of overheating the field windings.

OTOH if that were indeed the case, why did Delco continue with the 3 brush generators for several years after the transion from from manual charge control (cutout and combo charge control/headlight switch) to voltage regulators?

Gotta believe there's a valid engineering reason for this - what it is however eludes me! Your thoughts??? ...Bob M

Replies:

• Re: Delco Remy 3-brush generator John T 12:44:46 10/25/06 (0)
• Re: Delco Remy 3-brush generator Bus Driver 09:17:42 10/25/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]