Re: Super A Wheels

Posted by Roger Mills on November 16, 2006 at 10:25:10 from (64.122.113.206):

In Reply to: Super A Wheels posted by Lane R on November 12, 2006 at 08:47:43:

I just received an original A and Super A set of manuals and there are two front hubs shown for the A series except for the AV, one has a circular step in the casting and takes the bare rim and individual cast clamps. The rim sits in the step of the hub casting and cannot be adjusted in any way. As an option the front hubs are flat surfaced and the wheel has three U shaped lugs with holes to bolt them to the hub. These lugs are riveted to the rim on either side of the lug. Spacers can be placed between with longer bolts to adjust the wheel offset from the hub. They allow the front track to be adjusted between the front end adjustments.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]