Re: Super A - new pistons. won't turn

Posted by El Toro on November 26, 2006 at 07:06:50 from (205.188.116.133):

In Reply to: Re: Super A - new pistons. won't turn posted by RCA 49SA on November 26, 2006 at 06:17:30:

You can check with your local auto parts store to see if they sell individual piston rings. I was wondering if those rings are .010" oversize that you installed on your pistons. You should be able to tell when you install them in the sleeve since the ring gap will be near zero. Hal
PS: I bought individual rings for old garden tractors from our local auto parts store. They need the piston diameter and the width of the rings.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]