Re: C-113 or C-123 how do you tell??

Posted by Hugh MacKay on November 30, 2006 at 15:30:58 from (209.226.247.42):

In Reply to: Re: C-113 or C-123 how do you tell?? posted by Red Dave on November 30, 2006 at 12:27:50:

Dave: Measuring the hole where O ring seats will not give it to you in all cases. Super A after serial number 310000 had the same block as Super C with sleeves that had the same outside diameter, yet the SA sleeves were thicker giving 113 cubic inches. SA would have been 3" bore while SC was 3-1/8" bore.

I have one of those SA, and the sleeves must be 1/4" thick. I have been advised I can drop SC sleeves in there without modification.

Replies:

• Re: C-113 or C-123 how do you tell?? Red Dave 16:16:10 11/30/06 (1)
  • Re: C-113 or C-123 how do you tell?? Hugh MacKay 16:44:02 11/30/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]