Re: No low end torque

Posted by North Dakota H Puller on December 17, 2006 at 13:16:16 from (208.107.203.215):

In Reply to: Re: No low end torque posted by ChadS on December 17, 2006 at 11:14:13:

Not sure about the lobe separation angle. Seem to have lost the
cam card. Yes they are the flat top pistons. We have installed a
300 head for more compression and bigger valves. Not sure about
domed pistons. The cam may have too high of lift for clearance. I
know my machinist has redid a cam in a super M diesel and put
valve reliefs in the pistions. I am wondering if I can do the same.

Replies:

• Re: No low end torque ChadS 10:41:48 12/18/06 (2)
  • Re: No low end torque North Dakota H Puller 10:59:42 12/18/06 (1)
    • Re: No low end torque ChadS 13:16:21 12/18/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]