Re: boring the block

Posted by hydro on December 25, 2006 at 07:22:37 from (74.34.95.51):

In Reply to: boring the block posted by north Dakota H puller on December 24, 2006 at 20:01:44:

I had the local machine shop bore my H block to Super H specs. You can then install the 3 9/16 thin wall sleeves and pistons. It's no different than going from 3 3/8 to 3 7/16, you will still have a sleeve. I pulled the tractor for three years and it's been on an auger for 25 years. No problems.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]