Farmall A head gasket with or without water pump

Posted by Greg-N-CA on December 29, 2006 at 16:42:39 from (4.246.90.211):

In rebuilding my Super A, I have come across a small problem. I was asked if the engine had a water pump or not when I purchased the head gasket. The engine does have a pump and I received a gasket that has much small water passages than the one I took off the engine. The holes will be restrictive as opposed to the gasket that had passages the full size of the ones in the block and head.

Should I be concerned about using the new gasket with the smaller water passages or go with it? My thought is that it will be OK, but I just wanted another opinon.

Thanks in advance, Greg

Replies:

• Re: Farmall A head gasket with or without water pu Greg-N-CA 06:29:47 12/30/06 (0)
• Re: Farmall A head gasket with or without water pu TractormanNC 17:22:20 12/29/06 (0)
• Re: Farmall A head gasket with or without water pu Red Dave 16:51:57 12/29/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]