Re: HP Increase SC with 3 and 1/4 inch high domes

Posted by JD Humm on January 14, 2007 at 11:47:58 from (70.128.255.146):

In Reply to: HP Increase SC with 3 and 1/4 inch high domes posted by JD Humm on January 14, 2007 at 11:38:38:

This is the tractor we are rescuing and the engine is the one being gone through. The block and head is at the machine shop now. This tractor has sat locked up for YEARS but is very low houred, everything is super tight wear wise. Note the optional hour meter on the top of the instrument cluster. It shows 1500 and some odd hours. Do believe these hours might be actual from the lack of wear on the pivot points. This will make four Super C's in our collection of 12 running IH tractors.

The tractor is completely disassembled now, the rear end housing has been completely stripped of all parts for cleaning and resealing.

I have all the other parts necessary to make it run again, including good tires and rims, both front and rear. The rust God will not get this one for a while yet.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]