Re: Again the Heads low comp. to a high comp.

Posted by Far Mall Phil on January 22, 2007 at 01:26:26 from (170.93.140.8):

In Reply to: Re: Again the Heads low comp. to a high comp. posted by Baxter-13 on January 21, 2007 at 13:15:13:

Ryan,
If the head you have is the one that you got from Bruce, it is WITHOUT A DOUBT an 8060 head!

It WILL work on the M tractor that he gave you.

I have seen the 8060 head that he had in person and know the M tractor he gave you as well.

I do not know anything aboout your mechanical skills, but maybe you should get a mechanic or someone that has worked on an M to help you out so you can solve your problems.

The man that gave you that tractor knows a whole lot more about the letter series Farmalls than people give him credit for.

He can work on a any of the letter series blindfolded. He has helped out a lot of folks in your area. Heck two years ago I saw him change a clutch system in a Farmall H in a little over 40 minutes from start to finish, and he did this all by himself. He has a shop full of special tools (splitting stands, jack adapters to hold/lift just about anything, a nice hydraulic sleeve puller with a complete set of pucks for it, etc.) All of these tools he has made in order to work on these tractors.

If I were in your shoes I would not hesitate to contact him and ask for his assitance.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]