Re: 706D wiring for lights

Posted by GeneP on January 23, 2007 at 12:30:28 from (72.47.42.87):

In Reply to: Re: 706D wiring for lights posted by Allan In NE on January 22, 2007 at 18:03:26:

I like the tractor vets idea of the breakers, but I already had the fuse holder and new switch bought from IH. I dug into it last night. Some of the terminals on the old switch were so corroded that they just broke off. I cleaned each wire with a small brass brush, WD-40 and a pocket knife. I replaced the fuse holder, it was not letting current out and when I tried it everything worked!! First time in years. I did not have the flasher so I still have that to finish, ordererd it from IH and they will have it thursday.

Thanks for the advice.

Gene

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]