Farmall & IHC Tractors Discussion Board |
Re: International 584 hydraulics/diff lock repair
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Fromjb2 on January 26, 2007 at 12:12:55 from (74.101.67.211):
In Reply to: International 584 hydraulics/diff lock repair posted by Jason Michiels on January 26, 2007 at 10:35:21:
Hi Jason, how many times have you changed the hydraulic filter? How is the hydraulic fluid level, dose no harm to overfill dip stick level by 2 to 3 gallons. My brother had a hired hand drive around with parking brake on, on his 684 but was lucky by changing hydraulic filter frequently the filter removed all the harmful bits. I believe that if the hydraulic filter becomes clogged there is a bypass mechanism that will allow the bad bits to go thru the complete hydraulic system. Maybe Bernard Le Mechano will see your post and answer your questions as he worked at IH on many of these Doncaster build tractors. Good Luck JimB
Replies:
Home
| Forums
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|