Re: Assembling Rear Seal On WD6

Posted by Owen Aaland on February 15, 2007 at 19:57:25 from (65.165.246.11):

In Reply to: Assembling Rear Seal On WD6 posted by Tyler Cohrs on February 15, 2007 at 19:12:36:

A rubber type seal is a little more forgiving of
crankshaft play caused by loose bearings.

A felt seal will work fine provided that the
bearing clearance is within specs, the
crankcase ventilation systems is working
properly, and the there is not too much
cylinder blowby. Warped seal retainers can
also cause a leak between the retainers and
the block.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]