Re: 3414 loader tractor brakes

Posted by FromJB2 on June 27, 2007 at 17:57:32 from (74.101.67.211):

In Reply to: 3414 loader tractor brakes posted by Boblang on June 27, 2007 at 10:54:27:

Hi Boblang, have done the ag version B414. Required about 1 hour per side. On B414 had to remove hand brake mounting assy. You have to clean the ramp and rollers and lightly lube with a powdered grease. Next check to see if the new disk fit inside the worn metal braking surfaces or do they ride up on the the outside ridges? If they ride up on the outside ridges, you have two options: 1)have the metal braking surfaces ground down
OR 2)Grind a little off the outside diameter of the new brake rotors to fit inside the worn metal braking surface.

JimB

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]