Re: 560 diesel question

Posted by the tractor vet on July 02, 2007 at 16:17:19 from (75.19.127.119):

In Reply to: Re: 560 diesel question posted by Wardner on July 01, 2007 at 20:17:28:

Only time will tell and it will let ya know when it does suck one . That is why they have them letter stamped next to each hole so ya can get the correct fit sleeve . Over the years i have seen some block that are all A-B class. and some that are all C-D class and if ya want them all to be the A-B class. then ya bore the block and install a repair sleeve and bore it to the small bore . and be kind and re stamp the top of the block . I have seen or heard of guys take a hone to the block and hone on them so that they can just slide the new sleeve in and when it get sucked down around the crank they wonder what happened and why.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]