Re: 230 Fasthitch

Posted by georgeky on July 07, 2007 at 07:46:32 from (64.12.117.8):

In Reply to: 230 Fasthitch posted by DozinHal on July 07, 2007 at 05:24:16:

Look on the underside of the cylinder. There is a pin there that has to be removed before the plow will work. This makes the cylinder float instead of being rigid. With the pin in the tractor will lift the rear end up enough to cause it to spin out before the plow gets in the ground. May this late in the season the ground is to hard for the plow to go in.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]