Re: Owen Aaland/Tractor Vet

Posted by the tractor vet on July 13, 2007 at 18:05:42 from (75.19.122.16):

In Reply to: Owen Aaland/Tractor Vet posted by Allan In NE on July 13, 2007 at 15:30:43:

Well Allen they realy suppose to be a GROVED TAPPERED pin . Now if things are wore or someone has drilled it stright and installed a roll pin or a ROLLEd pin here is what i have done , I have drilled them out to 1/4 inch and taken a grade 5 bolt and ground the head down to almost paper thin so it will not bind on anything and used a half nut as they are thinner so here again it will not catch on anyhting and it is fixed and ya ain't going to shear it . Also take a center punch and stake the threads so the half nut does not back off.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]