Re: Rings for 3 B

Posted by El Toro on July 24, 2007 at 09:12:53 from (152.163.100.203):

In Reply to: Rings for 3 B posted by school teacher on July 24, 2007 at 08:50:57:

You can try an auto parts store like Napa to see if they can get just 3 piston rings. You will need the width of the rings or ring lans off the piston. You should run a glaze breaker thru the sleeve so the new rings will seat themselves. You should take a look at the rod bearings too.

My IH manual has the 2 compression rings width at .125" and the oil ring at .250". You need to double check these. Hal
PS: Some oil rings were .1875"

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]