Re: SC Progress so far.

Posted by georgeky on July 28, 2007 at 19:13:08 from (205.188.117.137):

In Reply to: Re: SC Progress so far. posted by Idaho Ron on July 28, 2007 at 18:08:03:

Ron the valve for the fast hitch is completly seperate from the touch control unit. It only attaches to it. I would start by stopping the leak at that hose and then see what you have, The cylinder wouldn't be leaking out where you could see it. It may be letting oil bypass from one direction to the other. When raised up the bottom of cylinder is full of oil. If the piston is leaking it would let oil leak past it into the top of the cylinder, thus letting it down. I suspect stopping the laek at the valve and hose will cur your problem. There is a kit available for the valve.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]