Re: Prime Hyd pump on 300rc

Posted by Janicholson on August 07, 2007 at 17:41:32 from (66.173.50.31):

In Reply to: Prime Hyd pump on 300rc posted by agpilot on August 07, 2007 at 12:15:23:

Some 350 pumps have a small bleeder (plug) in the top of the pump casting. If yours does, go there. If it does not, I would loosen the manifold attached to the pump and let air out there. Some have put 5psi on the filler neck with a rubber stopper (no more than that) to get them primed, but We never had to. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]