Re: Help! Farmall H not running smooth

Posted by CENTAUR on August 13, 2007 at 10:31:34 from (75.3.200.244):

In Reply to: Help! Farmall H not running smooth posted by Aaron B on August 13, 2007 at 09:59:01:

I would clean the sediment that was laying in the bottem of the carburetor when you tipped it over from the upright position when you handled it.The sediment is now where?clean the carburetot with a spray can of brake clean on the outside first as this will soften the gasket so after you loosen the two halves you can tap them to free them up.Then blow out while wet from the cleaner.Do not let it dry before blowing out.You may need a gasket for the BOWL to THROTTLE BODY. CENTAUR

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]