WD 9 Injection Pump differences

Posted by tom upton on October 29, 2007 at 14:26:46 from (216.168.96.86):

My brother has a WD 9 with some cracked injection lines, could not find supplier of new lines so he bought a parts tractor that had good lines on it. Trouble is they do not fit. I guess there must of been some changes to lines/pumps used on these thru there production? Now he is thinking change the whole pump over? First 5 digits on pumps are the same but the older one has a couple of letters and the doner pump has 3 numbers . I think 1.02? My question is do these pumps interchange ? I am guessing I will have to keep the injectors with its respective pump as well?( pretty sure brother says injector end of line would not thread on either? )Sorry for the ignorance but I am a Oliver guy and have never done much on Red stuff.Any help would be much appreciated asmy brother needs to get the old girl running as it is the power source for his sawmill.

Replies:

• Re: WD 9 Injection Pump differences Ron in Nebr 18:03:38 10/29/07 (1)
  • Re: WD 9 Injection Pump differences tom upton 19:47:24 10/29/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]