Bob Kerr said: (quoted from post at 20:24:52 05/14/08) A truck dropped a new Saginaw 3 point hitch off in my yard today! My H"s easy life will soon be over! It will go from sledding logs and pulling firewood trailer to doing that plus grading, bushhogging, picking up heavy stuff with the boom, and of course a tractor show and drive for the "weekends off".
Bobby-O: Funny you should mention that; my Saginaw arrived here last Tuesday week ago - just under the wire at the old price. I already have it installed on my Super M, but have yet to have the hydraulic lines made up. I have a remote (2-way) valve, and I am going to put this "lazy M" to work also.
One thing I noticed about my Saginaw, is that the holes are drilled wrong (too wide) to reinstall the old drawbar on the Saginaw. My drawbar won't fit, and when I compared measurements to my SH drawbar, it validated to me that the holes were wrong - not that my drawbar was sprung out of shape as the guy at Saginaw suggested. Please let me know if you have the same problem, or not. Thanks. mike (Red Mist)[b:d2d603607b][/b:d2d603607b]
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
