Posted by tcanthonyii on December 04, 2008 at 21:15:49 from (98.16.141.155):
So today was my 26th birthday. My in-laws gave me the first part of a two part gift. For my birthday was an M&W Live Hydraulic pump and reservoir. For christmas they are giving me behlen power steering, all to fit my M. Not a bad deal I didn't think. I also bought the M from him with 3 new tires and just needing the points cleaned with working loader for 200 bucks.
What I want to find out is information on the pump. On the tag it says
M&W Gear Company
20tfx
3hcs4-4r
52670rc-aa7y
Does anyone have any information on this? I'm hoping it has enough flow to run my loader as well as the power steering. My loader right now is just an old stanhoist trip bucket i'm running off of the belly pump and it only has one way cylinders. I'm then also wanting to retrofit a cylinder to make the dump hydralic instead of trip bucket. Especially when I get the Farmhand loader fixed up as it has a snow bucket. The farmhand loader is also just a trip bucket as well that I will retrofit into to hydralic lift and probably double acting cylinders at some point.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
