Posted by Tom in Iowa City on January 28, 2009 at 08:12:55 from (173.19.92.27):
See my post of yesterday, below. I did some more checking. NAPA and Car Quest have a kit identical to each other, with gaskets and stuff for several carbs. But the kits DO have the proper brass retainer for the felt packing for the throttle shaft. They also have the PROPER seat and needle for the gas inflow. Remember, I told you the TISCO kit was s---. Each of these kits are in the 30 to 35 buck range. I am getting a kit from O'Reily's that is only 13 bucks and may have only what I need. Mind you, the 30-35 buck and the 13 buck kits have NO throttle shaft and NO choke shaft. I guess this is the kind of thing that we have to contend with when we have old equipment. But I am disappointed that the TISCO kit has the WRONG parts for what they clearly label as for a 9752 Zenith Carb for a Farmall A. I also, on principle don't think that Yesterday's Tractors should charge me a 20 percent restocking fee when I send the kit back to them. Tom
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
