Posted by Hugh MacKay on July 22, 2009 at 16:35:02 from (209.226.247.115):
In Reply to: Super A rear axle posted by Charlie Atkinson on July 22, 2009 at 16:08:45:
Charlie: It will but the drilled holes for drawbar and other attachments are not the same.
I saw your other thread, what is your Super A serial number? In late 1953 those final drives changed a bit, brakes became same as 100, 130 and 140. The case hardening of the gears changed as well, they are harder. This could be your problem. I have a blue ribbon service manual for a 140. In discussion with a fellow couple months back, his Super A was not exactly same, re spacers and washers on that axle. I haven't sorted it all out yet, but it sounds like changes were made couple times in 53.
There were more changes made to this little offset tractor during Super A production, than during the rest of the 40 year production of A, SA, 100, 130 and 140, this includes model change.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
