|
Farmall & IHC Tractors Discussion Board |
Re: Casting code trivia
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by Redfan on May 01, 2000 at 04:22:08 from (203.87.53.9):
In Reply to: Casting code trivia posted by Greg in Aussie on April 30, 2000 at 19:21:48:
I've never really looked into the Nos. on the Aus. built tractors Greg, but first chance I get, I will. I know our SAWD6 is a 1956, our AW7 1958, A554 1962 and 564 1968. I'll even check the 786 and see if the casting codes are similiar. Always found casting codes can cause some amount of confusion and even conflict. We picked up a farmall M, Serial No.BFK5431 X3A, which means it should be a 1939 model. Problem is all the casting codes end in B. If it was an AM, the codes might make more sense, but the BFK Serial No prefix and X3A Suffix suggests it is an imported tractor. Beats me mate.Regards, Redfan.
Follow Ups:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
