Farmall & IHC Tractors Discussion Board |
Re: Another governor problem
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Douglas Stockman on July 05, 2000 at 10:11:47 from (128.151.71.1):
In Reply to: Another governor problem posted by Fudd on July 04, 2000 at 10:34:41:
Fudd: I do not know anything about a 400, but I am in the middle of a similar battle with my 1940 A. Everything in the governor seems tight except the spring was not being stretched at anything less than almost full throttle and I lost all responsiveness. I replaced the spring and I still had all this slop with the spring. I then re-read the service manual very carefully. When mounting the spring, I was not rotating the spring along its long axis by 180 degrees (i.e. unwinding the spring) before connecting the top connector. I did this rotation trick at the end of last weekend. I have not had a chance to start the tractor, but my throttle control is now nice and tight and I can visually see a better correlation between throttle movement and carb arm movement. I hope to check out my change this weekend. As I said, I do not know how a 400 is put together, but your problem does sound similar to mine. Maybe the spring trick will help. Contact me if you do not understand what I am trying to say. Douglas Stockman Penfield, NY dstockman@pol.net
Follow Ups:
Home
| Forums
Today's Featured Article -
Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
Latest Ad:
1997 cub cadet 7275 compact utility tractor 4wd hydro trans cracked block 3500
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|