Posted by cuttman on June 03, 2011 at 06:31:10 from (184.1.107.185):
I have a farmall b and trying to finish converting to 12v that someone else started. I have a 10SI (3 wire)alternator. the wire from the batt. Terminal on it runs to a ammeter then it comes off the ammeter to the starter switch (10 guage wire) located on the starter itself, then I have a wire (2 guage i beleive) going from their to the positive battery terminal. Now I also have a 12 guage wire with a diode going from ammeter back to alternator on the #2 terminal to excite it. My problem is I charge the battery and the next day it is dead. I haven't used it in the field yet, still trying to figure this problem out, battery is only year old and holds charge when off the tractor and alternator tested good from autoparts store. Please all comments welcome, this is getting frustrating. I used bobs farmall m wiring diagram, still no luck. Sorry for the long post.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
