Re: Belly pump on H

Posted by The Red on August 22, 2000 at 05:17:58 from (12.75.197.169):

In Reply to: Belly pump on H posted by Nich on August 21, 2000 at 19:28:45:

John about said it all. The pump and reservoir way around 100 pounds. After you have dropped the liftall, remove the pump assembly. It bolts into the reservoir assembly with around 10 bolts or so. Once the pump assembly is out, stick a large screwdriver up the inlet port so the counter shaft will not turn. Then unscrew the coupler counterclockwise. You can then pry out the old seal and replace it. In all you will need a seal and the reservoir gasket.

Follow Ups:

• Re: Re: Belly pump on H Haas 05:49:43 08/22/00 (2)
  • Re: Re: Re: Belly pump on H Haas 05:53:58 08/22/00 (1)
    • Re: Re: Re: Re: Belly pump on H The Red 07:17:53 08/22/00 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Belly pump on H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]