Farmall & IHC Tractors Discussion Board |
Re: Re: Re: S-C Farmall Clutch
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Larry Ks. on August 28, 2000 at 22:24:10 from (205.171.70.136):
In Reply to: Re: Re: S-C Farmall Clutch posted by Larry on August 28, 2000 at 18:21:23:
One more suggestion before splitting...If you backed the bolts off on the pressure plate, and still the plate is stuck, it must be stuck big time. I'd try one more thing (I've had to do this with trucks before) 1st. let me ask you this...have you let the tractor sit and run in neutral, and let the engine come up to operating temperature??? I've had to do this on farm trucks, usually the flywheel will heat up enough, so that you can then jar it and break the plate loose. Ok...here's my suggestion. put it in neutral and let it come up to operating temp. maybe even put something over the radiator to make it go ahead and warm up. When its up to temp. Start it in gear and drive around....pushing the cluth in, and hitting the brakes. I've even jacked a wheel up, started in gear, and had someone let the jack down and drove off. I wouldn't guarantee this will work, but I've done it before and its worked for me. Its kind of amazing that it could get stuck that much, in a relatively short time period. I think, at least for me, the temperature from the engine does a whole bunch to help free it up. Hey post back and let us all know how you got along. No matter what----be darn careful!!!! Don't let you or someone else get hurt with the darn thing!!
Follow Ups:
Home
| Forums
Today's Featured Article -
Fabrication (Who Me? Make it myself?) - by Chris Pratt. First of all, what are the reasons for not fabricatin your own parts? Most judgements on what should be purchased rather than fabricated stem from: Originality - If the tractor restoration is to be 100% original, it is likely that you should spend the time and money to locate the component in the used or New-old-stock market. Since this can be extremely difficult, you may want to fabricate the item or purchase a modern replacement temporarily, but eventually, you s
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|