Farmall & IHC Tractors Discussion Board |
Re: Farmall M electrical troubles
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob M on November 07, 2000 at 05:36:50 from (172.153.64.186):
In Reply to: Farmall M electrical troubles posted by Jim Hines on November 06, 2000 at 05:21:17:
Jim - First you gotta find out if the magneto is working. Remove one spark plug, lay it on a metal surface on the tractor and reconnect the high tension wire to it. Now crank the engine and see if there's spark at the plug. If yes, the mag is OK and you've probably just flooded the motor. If no spark, then the mag is gonna need work. The "no charge" condition with the engine running could be a bad generator (usually worn out brushes), a bad cutout/regulator, or bad wiring. Test by running the engine at full speed and jumpering the GEN and BAT terminal on the regulator. If the ammeter now shows a charge, the regulator is bad. If nothing changes the problem is either in the generator or wiring. Good luck!
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|