|
Farmall & IHC Tractors Discussion Board |
Need Help in Identifying an IH carb !!!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Alberta Mike on November 13, 2000 at 20:08:16 from (209.115.159.101):
I've got an IH carb here that I pulled off a wreck a few years ago. It is definitely an IH, maybe a numbered series but I'm not sure. It has the front position throttle linkage hookup with the governor shaft (not quite sure how that works exactly since I'm not too familiar with IH). It's a big bruiser of a carb, the manifold mount holes are about 2 11/16 inches apart (center to center) and they would be 3/8" bolts. The throttle throat is 1 7/16" diameter and the air intake has a diameter of 2 1/4". There is a small brass washer style tag riveted on the upper half that has the numbers 361525R92 stamped into it. Any idea of what model or series of IH this thing came off? And what other model(s) could use it? Thanks.
Follow Ups:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
