removing wear sleeve on H front wheel

Posted by bmagee on September 13, 2013 at 18:58:58 from (50.90.21.188):

rebuilding the front end. I was able to weld a bead on the inside of the front bearing cup. heating it up - it fell right out. Now on the back side, I did the same, but cup wont come out due to what I believe is the wear sleeve?

my question is can I weld a bead on the wear sleeve and it fall out hopefully?

I did put a couple small bottle touches to heat it, but it would not move.

Any ideas?

NOTE: thanks to Ken Updike for the weld trick.

Replies:

• Re: removing wear sleeve on H front wheel bmagee 06:35:26 09/14/13 (0)
• Re: removing wear sleeve on H front wheel pete 23 20:18:42 09/13/13 (0)
• Re: removing wear sleeve on H front wheel gene bender 19:53:50 09/13/13 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]