Re: eastexen pic of tool box

Posted by eastexan on September 02, 2009 at 20:44:38 from (96.15.31.59):

In Reply to: eastexen pic of tool box posted by souNdguy on September 02, 2009 at 17:40:31:

souNdguy said: (quoted from post at 17:40:31 09/02/09) a 2-jaw puller should fit. you can take 2 heavy hameers and use one to place agaist one side of the joint, and then hit the other side of the joint 180' away, that way you are striking the socket opposite of the other hammer.. this stretches the metal a wee bit.. that and penetrating oil and the puller should yank it off.... just put the nut back on and grease the splines to keep them from rusting.. somone else may want to put the arm back on down the road.. won't need any washers or anything.. that sector arm shaft will stay put. soundguy

Sounds like a plan. I'll soak it good with some PB Blaster for a few hours and then do the hammer & puller trick.

Thanks for the info.

Replies:

• Re: eastexen pic of tool box soundguy 05:29:44 09/03/09 (2)
  • Re: eastexen pic of tool box eastexan 05:49:58 09/03/09 (1)
    • Re: eastexen pic of tool box soundguy 05:59:31 09/03/09 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]