Ford 9N, 2N & 8N Discussion Board |
Re: Tractor painting
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by lonestarjeff on October 30, 2005 at 10:52:21 from (24.1.34.31):
In Reply to: Tractor painting posted by Rob N VA on October 29, 2005 at 19:03:32:
Rob: I did quite a bit of research before I painted my 8N this past spring. Read alot of posts in the "paint & bodywork" forum, too. There's nothing wrong w/ TSC paint, it's just an older technology(alkyd), about the same as the original factory paint. If you want to step up a notch, technology-wize, look at Tisco or F/NH brand paint. It is an acrylic paint, more UV resistant & a little glossier. That's about as hightech as you can go w/o adding catalist(hardener). Both of the above are more scratch-resistant & glossy if you DO add hardener, but you don't have to for a nice lookin' job. Keep in mind, though, if you use alkyd(like TSC)paint w/o hardener it needs about a month of fair weather to reach max cure, 'til then you can just about knock paint off w/ your thumbnail. I used TSC paint(Ford Red)w/ hardener on the bulk of the tractor & Tisco paint(Ford Red)w/ hardener on the separate red parts. Tisco(Ford medium gray)on the sheet metal. Looks great for a work tractor & the reds matched up fine(the Tisco is a little slicker). I'm happy w/ the quality of my paint job on the red, but the sheet metal would be better if I did it again. I figured out that spray gun about the time I finished up. There's no way to tell how you'll react to using hardener in the paint, it ranges from no ill effects to SEVERE respiratory distress, depending on the person. For instance, I & others on this forum have used it(outdoors)w/ no problems, but the next time could be completely different. Very unpredictable. Jeff
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Variable pulley for case 1530 skid loader
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|