Ford 9N, 2N & 8N Discussion Board |
Re: clutch replacement: how long / how hard
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Stumpalump on October 08, 2006 at 07:25:47 from (71.56.206.103):
In Reply to: clutch replacement: how long / how hard posted by Teacj on October 08, 2006 at 05:18:30:
It took mt wife and I 1.5 hours from start to clutch laying on the floor. Thats gettin tools out and everything. The F04 service book is dead on. The trick like Zane was showing you is lifting the steering with dash and hood still on. We used a tie down ratchet strap looped over the garage rafter. Then we just lifted enough for clearance. The getting it back together for me was simple. I did it alone BUT I have fought the hassles of lining engines back together befor. So on my tractor split I made sure I was parked on level concrete and I had two nice floor jacks. Sweeping the floor clean and oil the wheels on the floor jacks first will help.If it wont slide together change the height of the jacks and just keep trying, Actually since you have the rear tires to roll it's a nice job. Ditch the clutch alignment tool and unbolt and use the shaft coming out of your trannsmission. You need to change this seal anyway. Trust this. Ask if not sure. I'm not telling you much that I have't leared on this website myself. Oh and don't forgit to hook up the oil pressure line before you start it. Big mess.
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: Winterizin Engines - To Drain or Not to Drain? - by Staff. Another great discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "Winter is fast approaching..for a gas tractor should the gas tank be drained and run the engine til the carb is dry or do the gas stabilizer products I've heard of work? (tractor will not be used til spring) any other tips for winterizing?? "
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|