Re: Inside my newly sandblasted wheels-what to do?

Posted by Dan on March 22, 2007 at 04:47:44 from (76.184.193.88):

In Reply to: Inside my newly sandblasted wheels-what to do? posted by Dave11277 on March 21, 2007 at 23:50:49:

I found a set of original Ford scripted front wheels at my local boneyard. I wire wheeled them inside and out to get the rust out (sandblasting would have been MUCH easier). The insides were corroded and rough as well, but solid. I sprayed mine with a thick coating of phosphoric acid after I wire wheeled them to stop any small amount of rust hiding down in the pits and cracks. Then I put a good thick coat of enamel paint on the inside and out - that should work.

I do like the idea of using the truck bed liner paint. I would still coat in phosphoric acid though to stop the rust.

Good luck,
Dan

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]