Posted by mkirsch on May 07, 2012 at 05:47:40 from (64.80.110.75):
In Reply to: hydraulics for dump posted by Joel59 on May 07, 2012 at 05:37:33:
Well first off are you sure the pump is any good?
Second off have you tried using an external reservoir?
I think you may have some fluid draw issues trying to use the cylinder as the only reservoir.
Your buddy's "dump pump" has a small internal reservoir that it draws from, and the cylinder is just an auxiliary reservoir to hold enough extra fluid to dump the bed.
I would hook it up like this:
1. Small 1-2 gallon hydraulic reservoir mounted near the pump.
2. Port near bottom of reservoir to suction side of pump.
3. Pressure side of pump to IN on 3-way valve.
4. OUT on 3-way valve back to port near top of reservoir.
5. Line from work port on 3-way valve to bottom port on cylinder.
6. Line from top of cylinder to fill port on small reservoir.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
