Posted by 36F30 on December 29, 2012 at 14:19:30 from (75.170.167.140):
In Reply to: Long arcing sparkplug posted by John T on December 29, 2012 at 06:28:49:
Quoting Removed, click Modern View to see
I already have a 4 year college degree and earn a living fixing things others can't...so please Explain to me why then a fouled plug that is bleeding off voltage from the coil according to the "professionals" does not effect the other cylinders when its their turn ie. rotor in alignment, to fire. If it as you say and the fouled plug has some magical connection to the coil then 1 fouled plug should prevent all the cylinders from firing. The coil has the exact same potential for all the cylinders and each cylinder has its own circuit (wire and plug), the fouled plug is a SHORT in that cylinders circuit, After firing the shorted cylinders circuit, the points then close recharging the field and the rotor moves into the next cylinders circuit. The dead (shorted) cylinder behind the rotor is now isolated from the coil.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.