Posted by Kirk Grau on February 07, 2013 at 09:59:20 from (98.235.64.137):
Not my usual cup of tea, but have a client that asked for my help. Since you guys have great volumes of practical experience I am hoping you can help me brainstorm a few options.
Client is a small campus. Currently receives rock salt in 50 lb. bags and load small hoppers on gators and pickups for spreading. Would like to receive salt in bulk via dump load for cost purposes and eliminate the manual lifting via some sort of auger/loader set up.
Campus is pretty landlocked so a new building is difficult, but that is one option to consider. I am thinking something tall enough to back into and dump then skid loader dumping salt into a hopper that feeds an auger into their spreaders.
Another thought is to utilize the garage space that is currently dedicated to salt storage. It is not tall enough to raise a dump bed so receiving becomes problematic. Thinking of some sort of rolling hopper that could roll out to receive a load and roll back into the garage. Other thought is to somehow modify the garage (can get a truck behind it) to allow dumping into a hopper and transfering into garage or some sort of slanted funnel to transfer inside.
Anybody know manufacturer"s who do stuff like this.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
